Want this question answered?
The pressure of water in the pipes is called the 'head of pressure' and it is the difference in level between the water surface height (above sea level) in the nearest reservoir to the height (above sea level) of your tap. This 'head' will be higher for a downstairs tap than an upstairs tap and therefore the pressure and water flow rate upstairs will be less than for downstairs.
household ammonia has pH of approximently 11.5
it depends how long you leave the tap on for and what pressure the water is coming out at. e.g. if the water pressure is 5litres per second and you leave it running for 30 seconds, then 5 * 30 = 150litres would come out.
Distilled water would evaporate slightly faster, all conditions being equal, because dissolved minerals reduce the vapor pressure of tap water in accordance with the colligative properties of water.
yeah.. Tap water will evoporate faster since Carbonated water is usually containing salts, charged under pressure with purified carbon dioxide gas, used as a beverage or mixer which make it or requires much heat. While the Tap water which Water drawn directly from a tap or faucet can evaporate quickly.
"Household" water is also referred to as "Tap" or "Reticulated" water. It is the water that is normally supplied to the house for general use.
because of the pressure of the tap
Baking powder, tap water.
itive of pressure=
The recommended water pressure is 0.5 to 1 bar
The best option is a filter of pressure connected into the tap water output.
The pressure of water in the pipes is called the 'head of pressure' and it is the difference in level between the water surface height (above sea level) in the nearest reservoir to the height (above sea level) of your tap. This 'head' will be higher for a downstairs tap than an upstairs tap and therefore the pressure and water flow rate upstairs will be less than for downstairs.
The water in a building has a certain pressure, depending on how high the storage tank is. One tap opening has the full pressure acting on one small area, the size of the tap. If a second tap is opening the pressure acts on a wider area, so it is not so strong.
Well to start off with one the tap water in your sink is a base seeing as how water's pH level is 7
household ammonia has pH of approximently 11.5
it depends how long you leave the tap on for and what pressure the water is coming out at. e.g. if the water pressure is 5litres per second and you leave it running for 30 seconds, then 5 * 30 = 150litres would come out.
The water in your pipes is under pressure so that it comes out of the tap when you turn it on. If there is a hole in the pipe (i.e. a leak) then the water will come out under pressure, the same as if you turned on your tap - if this hole faces upwards then there will be a jet or water like a fountain. The height of this jet is dependant upon the pressure of the water