answersLogoWhite

0


Best Answer

1. Check the Area: Check the work area to ensure that all personnel are clear of the machinery and equipment.

2. Check the Machine: Check the machinery and equipment to ensure that everything is properly assembled, all nonessential items are removed, and the machinery and equipment is ready for safe operation.

3. Verify: Verify that switches and controls on the machinery and equipment are in the OFF position, are properly aligned, or are in the neutral position.

4. Notify: Notify the affected worker(s) of the return-to-service procedure. If there is a question about who the affected workers are, the authorized worker shall notify the machinery and equipment owner/operator.

5. Return: After the affected persons have been notified,

- notify the machinery and equipment owner/operator of intent to re-energize;

- obtain authorization to re-energize from the machinery and equipment owner, if required;

- remove the lock and tag from the energy-isolating device;

- re-energize and test the machinery and equipment or coordinate testing with the machinery and equipment owner/operator to ensure that the machinery and equipment can be operated safely (if independent verification is required, that task would be completed at this point in the process); and

- return the machinery and equipment to "ready for duty" status.

User Avatar

Wiki User

12y ago
This answer is:
User Avatar

Add your answer:

Earn +20 pts
Q: What is the proper five step USAF return to service sequence for lockout tagout?
Write your answer...
Submit
Still have questions?
magnify glass
imp
Continue Learning about Engineering

Why zero sequence current cannot flow through a star connected machine unless the neutral is grounded?

If the neutral point is not earthed than the zero sequence current will not have any return path.It will be an open circuit for the zero sequence circuit.


What is zero sequence impedance in transmission line?

In symmetrical components, there are three types of impedances - positive sequence (balanced), negative sequence (unbalanced), and zero sequence (ground). In a transformer, positive and negative are equal. Ground impedance is determined by the (same factors as the) positive sequence and is based on the flux paths available through the transformer core that can induce ground current.


In searching using Boolean operations will give you?

Searching with Boolean operations will only tell you if a value exists or does not exist in a data sequence. Ideally, when searching, you want to return some value that either refers to the value you are looking for or otherwise indicates that the value does not exist. Typically, we define a data sequence with begin and end iterators, where the end iterator is "one past the end" of the sequence, and return an iterator to the value, using the end iterator to denote the value was not found. When searching for multiple occurrences of a value, we typically return a collection of iterators, with an empty collection indicating no values were found.


Can you write a program using only sequence structures?

Sure: int main (void) { puts ("Hello, world!"); return 0; }


How do you find the smallest value in a set of numbers in qbasic?

Store the numbers in a suitable container such as an array. Assume the first number is the smallest and assign its value to a local variable. Traverse the remainder of the sequence, comparing each element's value to the stored value. If an element has a lower value, assign its value to the local variable. When the sequence is fully traversed, the local variable will hold the value of the smallest value in the sequence. Return that value.

Related questions

What actors and actresses appeared in Return to the NBA Lockout League - 2011?

The cast of Return to the NBA Lockout League - 2011 includes: Dahntay Jones as himself


The restoring of machinery and equipment to normal production operations return to service within the USF Lockouttagout program requires that authorized workers follow a sequential procedure spec?

return-to-service sequence step #3 = verify


What is compromise service?

A compromise service is a service that is performed in return for another service. An example of a compromise service is a hotel handing out discount coupons to patrons for a certain business. The business, in return, might let the hotel advertise at its establishment.


What was the exchanged in return for service and loyalty?

land


Can I resell a service that I bought from the whitepages?

You may be able to return a service through Whitepages from the seller in which you originally purchased it from. If you are unable to return it to the seller, you could advertise the service and sell it for a lower price.


A small amount of money in return for a service also a small amount of money in return for service is called ?

A fee? Or maybe a tip? Depends on the context.


Why zero sequence current cannot flow through a star connected machine unless the neutral is grounded?

If the neutral point is not earthed than the zero sequence current will not have any return path.It will be an open circuit for the zero sequence circuit.


What is zero sequence impedance in transmission line?

In symmetrical components, there are three types of impedances - positive sequence (balanced), negative sequence (unbalanced), and zero sequence (ground). In a transformer, positive and negative are equal. Ground impedance is determined by the (same factors as the) positive sequence and is based on the flux paths available through the transformer core that can induce ground current.


Capulize Mr Jones the internal revenue service would like to visit with you about your tax return?

Mr. Jones the internal revenue service would like to visit with you about your tax return?


Where can a business get an HP branded fax machine repaired in Detroit?

Actually this mainly depends on the support contract one has selected. Especially for business customers HP offers great options like for example the "Return Service", "Pickup and Return Service", "Next Day Exchange Service" and even more. So if one has for example selected the "Pickup and Return Service" there's no need to find a local repair service at all.


How do you write a return address to the US from Antarctica?

Your return address in Antarctica is based on the logistical operation of mail in your research station. Your station manager can give you the proper return address for your mail.


What is it that you often return but never borrow?

A service such as in volleyball and tennisA greetingLoveCompliments