There is no such thing as a 'phase conductor'; the correct term is 'line conductor'. In a single-phase system, the line conductor is the energised conductor; in a three-phase system, there are three (energised) line conductors.
A single-phase cable will have a line and a neutral conductor and, possibly, but not necessarily, an earth (ground) conductor. A high-voltage three-phase cable will have three line conductors. A low-voltage three-phase cable is likely to have three line conductors and a neutral conductor.
The purpose of the toughening phase is to develop foundational fitness and fundamental movement skills.
Only one neutral conductor is typically in a 3 phase panel.
The utility company can provide a 480 volt, single phase service from a single phase transformer, usually with a three wire service. 480 volts is measured between the two line conductors, and 240 volts is measured between either line conductor and the common neutral conductor. The voltage of the line conductors are at 180 degrees with respect to the neutral conductor.
Summarizing
There is no such thing as a 'phase conductor'. The correct term is 'line conductor'. Line conductors are the three energised conductors that supply a three-phase load.
A single phase supply can be obtained between any pair of line conductors or between a line conductor and a neutral conductor.
It depends on the electrical standards of the country in which you live. In Europe, for example, the line conductor(not 'phase conductor'!) is brown, the neutral conductor is blue, and the earth conductor* is green/yellow stripe.[*properly called a 'protective conductor']
Yes, except that the correct term is 'line' conductor, not a 'phase' conductor.
well that all depends when your dealing with what voltage is being applied to your motor,home, or building. the phase conductor in A panel box can be labeled with either red, or blue tape meaning that's the phase conductor or hot. This all comes down to with what type of electrical equipment or service your working with, The word phase just means that's the hot side and the hot side is usually the black wire, although a red or blue wire can to. Plus a wire being the hot conductor, or load the NEC likes to call it the phase conductor.CommentThe term 'phase' conductor, in this context, is incorrect. The correct term is 'line' conductor.
A ground, or earth, conductor is never included in the conductor count. So, a three-phase, three-wire, system has three line conductors, whereas a three-phase, four-wire system, has three line conductors and a neutral conductor.
A single-phase cable will have a line and a neutral conductor and, possibly, but not necessarily, an earth (ground) conductor. A high-voltage three-phase cable will have three line conductors. A low-voltage three-phase cable is likely to have three line conductors and a neutral conductor.
no
The purpose of the toughening phase is to develop foundational fitness and fundamental movement skills.
Only one neutral conductor is typically in a 3 phase panel.
Conduction or insulation depends on material, not shape or purpose. A metal blade is a conductor.
The neutral.