It enables a computer to switch ON after ensuring that the power supply turns ON and operates normally .In the event of malfunction of the power suppply the computer will not accept the power and refuse to boot.
It signals the CPU that the power supply has stabilized and is producing clean, usable
power levels, and the system can proceed with booting.
Too make sure you have the amount the thing needs to have. If Power_Good the you have it. If Power_ok then you may need more soon. If bad then you need to need to change it.
power good sgnal is +5v signal generated by power supply to ndicate that power is ready to use or ok...power good signal also known as power ok signal.smps gives the power good signal to the motherboard to indicate that it(power) is ready to use.it prevents the computr from attempting to operate in a improper voltages and damaging itself.
The power supply's power-good signal prevents a computer from operating on improper voltages and potentially getting damaged. Typically, a computer will only start up after receiving the power-good signal.
31,6 watts
itis a component that give a signal power to its sorrounding ANSWER: it a components that produces gain or loss or transform power to another level.
A repeater is an electronic device that receives a signal and retransmits it at a higher level and/or higher power, or onto the other side of an obstruction, so that the signal can cover longer distances.
power good sgnal is +5v signal generated by power supply to ndicate that power is ready to use or ok...power good signal also known as power ok signal.smps gives the power good signal to the motherboard to indicate that it(power) is ready to use.it prevents the computr from attempting to operate in a improper voltages and damaging itself.
The power supply's power-good signal prevents a computer from operating on improper voltages and potentially getting damaged. Typically, a computer will only start up after receiving the power-good signal.
a signal can never be both energy & power signal because they are mutually exclusive
The unit step signal is a Power signal. Since when we find the power it comes to 1/2 (i.e finite value). And when we find its energy, we got INFINITY. If a signal has energy as infinity and power as a finite non-zero value, then it is a power signal, not an energy signal.
If the signal is not bounded by a step function, then an exponential signal is neither a power nor an energy signal. So the answer is neither.
Those signals which have finite energy and zero power known as energy signal..Those signals which have infinite energy and finite power known as power signal..
A low bandwidth signal does not have more power.
no...it is neither energy nor power signal . Rampis neither energy nor power signalbecause it has infinite energy as well as infinite power.....saket kumar (electronics & communication engineer),BMSCE MUKTSAR (PUNJAB).
Yes, you can however the distance that a signal may be travel depends on the power and frequency of the signal. For signals at the same power a lower frequency signal will travel further.
It can be calculated by simplifying the ratio between power of signal by power of noise
A signal x(t) is called an energy signal , if the energy is finite and the power is zero.A signal x(t) is called an power signal , if the power is finite and the energy is infinite.
It doesn't matter. Both moves are equally good.