Sway bar has other names as anti-roll bar or stabilizer bar and is present in automobile suspension. The purpose of a sway bar is to keep the body roll of the vehicle at low level during a sharp turn.
One danger of not repairing a sway bar on a vehicle is that the stability of the vehicle could be compromised. Without broken sway bar, the vehicle is in greater danger of overturning.
The purpose of roll bars is to prevent a vehicle from rolling over. It contains a torsion spring bar that is also known as a sway bar to achieve this.
A little more information. Year/model. Some sway bar links become loose because of wear and the links continue to work but make a noise when the front end hits a bump. Other sway bar links will break altogether and the vehicle will lean excessivly when going around a corner.
Broken sway bar, bad or broken shock, or broken spring.
It connects the ends of the sway bar to the suspension of the vehicle.
get under vehicle with out jacking vehicle off the ground hold sway bar with hands try to move bar sideways if bar slides sideways in bushings, the bushings are shot not a hard job to repair
No!!!! It is very dangerous to drive any vehicle with a broken sway bar. Have this repaired ASAP and only drive it very slowly to the repair shop or DIY.
Handling the vehicle especially on corners will be poor.
It is called a sway bar or a control bar. It improves the handling of the vehicle while cornering. You will find one in the front also.
The links go on the end on the sway bar and hook to the suspension. Bushings are used to connect the sway bar to cars frame.
there should be a rear sway bar
sway bar