Lateral restraint ties introduce a mechanical connection between the floor/ceiling joists and the masonry.
Traditionally, this connection is made simply using skin friction due to gravity; however, if this friction is released due to movement within the timbers or masonry, it can lead to a freestanding wall that is susceptible to bowing.
The current standard repair method is using lateral restraint straps. These are galvanised steel strips, which run along the joists, bend perpendicularly and run either up or down the wall. Installation of such straps is a messy process requiring temporary removal of furniture, floorboards and plaster. Even once installation is complete, you are relying on the holding capacity of a wall plug and a screw.
An alternative repair method is using a product similar to Target Fixings' Bow Flex; a piece of stainless steel helical bar installed externally through drilled holes in the masonry into either the end- or side-grain of the joists.
The purpose of guy wire anchors is to counteract lateral forces on utility poles and towers induced by wind loads and lateral loads. These anchors usually consist of helical anchors screwed in the ground by hydraulic means.
Uniaxial Comprehensive Strength or UCS refers to the strength of a rock or soil sample when crushed in one direction without lateral restraint. The UCS of dolomite is 100-250 MPa.
The purpose of the Panhard Rod is to take up lateral forces between the axle and body thus removing load from the radius arms.
The lateral malleolus is the lateral projection from the distal fibula. This projection is the bump at the outside of your ankle.
in terms of anatomy, your ears are lateral from your nose
On the middle of the chest
Lateral Restraint Assembly
A sleep restraint is a set of straps, probably velcro, designed to keep austronauts from floating away from their beds. Strengthened versions may also be used for people who have violent sleeping disorders
The purpose of wearing suspenders is to hold up pants or trousers. Suspenders are straps that are worn over the shoulders. The straps can be either elasticized at the attachment ends or the straps can be entirely elasticized. The straps typically form a Y or X shape at the back.
Roofing restraint straps also known as hurricane straps are metal straps used to secure the roof to the rafters underneath. They are designed to provide extra support and stability to the roof particularly during high winds and extreme weather conditions. The straps ensure that the roof is firmly attached to the building and will reduce the risk of the roof being torn off in the event of extreme weather. Roofing restraint straps are essential for any building located in an area susceptible to high winds hurricanes or other extreme weather. Provide extra support and stability to the roof Secure the roof to the rafters underneathReduce the risk of the roof being torn off in the event of extreme weatherEssential for any building located in an area susceptible to high winds hurricanes or other extreme weather
lateral restrain means a restraint provided in the beam to prevent its curving.we can use an I section for that or more than one I sections.
The usual reference to restraint mitts refers to hand coverings used with or in place of straps to secure a patient's arms during medical treatment, as in seizures or mental illness, or to restrict the patient's ability to grab, pick, or scratch. Another type of restraint mitt is used to immobilize a hand where a splint in used to repair a damaged bone, tendon, or muscle.
Braces strengthen a structure, normally against lateral movement.
when concrete specimens(cube or cylinders) is compressed, lateral shear stress is developped. But near the area, where specimen is in touch with plates of compression machine, this lateral shear stress is reduced and forces the specimen not to increase area. Thia is called Platen Restrain Effect.
A cord restraint helps to prevent tension that is placed on a flexible cord from pulling on the conductors inside it. The simplest cord restraint is a clamp that firmly holds cords in place as they enter or exit a box of some kind. But more often the term cord restraint refers to a thing made of wire that gets tighter on the cord as tension is placed on it.
The purpose of guy wire anchors is to counteract lateral forces on utility poles and towers induced by wind loads and lateral loads. These anchors usually consist of helical anchors screwed in the ground by hydraulic means.
To mark the shipping channel.