On a single phase supply the neutral is one of the current carrying wires, the other one being the live wire.
The neutral is earthed at the tansformer and sometimes at other places as well depending on the system in use.
On a 3-phase 4-wire system the neutral carries current only when the load is unbalanced, in other words when there are unequal currents in the three live wires.
None.In standard single phase wiring there are 3 wires: hot (black), neutral (white), and ground (green). Each has a different purpose and none can be used for any other purpose.
so you know which wire is which! - live, neutral or earth
Because neutral doesn't have to carry the load current .This is either used for unbalanced current (in Y-connection) or for earthing purpose which don't require high ampere rating....
it uses for alternator protection purpose; when fault occures in alternator it resists that fault current to gound . srikanth, kaenataka .
A neutral solution is true neutral with a pH of 7,00.
To complete the circuit. The word neutral is a convention it does not mean it has no purpose
The purpose is to obtain a neutral solution.
None.In standard single phase wiring there are 3 wires: hot (black), neutral (white), and ground (green). Each has a different purpose and none can be used for any other purpose.
Presumably, you are asking the purpose of a neutral conductor, rather than 'contactor'?A alternating-current supply has two conductors, a lineconductor and a neutral conductor. The line conductor is at system potential (e.g. 230 V in Europe), whereas the neutral conductor is at approximately earth (ground) potential because it is earthed (grounded) at the supply transformer. The neutral conductor acts as the 'return' path to the transformer, carrying the same load current as the line conductor.
A neutral charge is often confused with a negative charge. I real neutral charge is an earth connection. The purpose of this is to stop any electrical shock to a person in the event of electrical fault causing the appliance to become charged.
One is live, one neutral, and one earthed.
so you know which wire is which! - live, neutral or earth
A universal indicator is an indicator that changes color along with changes in pH level. The purpose of using it is to find a point at which a mixture of acid and base becomes neutral.
Because neutral doesn't have to carry the load current .This is either used for unbalanced current (in Y-connection) or for earthing purpose which don't require high ampere rating....
It is hard to understand what you mean by "neutral" words. Every word has a purpose, so it is impossible for a word to be impassive. At the very least it is redundant in a given sentence and at the most it can be virulently aggressive. You might mean "neutral" according to gender, or the neutrality of the structure that is required of a good non-fiction assignment.GENDERPerfectCleverSmartNaturaletc.NEUTRALITY IN WRITINGOpinionClaimsAccordingetc.
"Good" in an extremely subjective term. It's good if the items serve a purpose for you. If not, then it's either bad or neutral.
it uses for alternator protection purpose; when fault occures in alternator it resists that fault current to gound . srikanth, kaenataka .