Want this question answered?
Closing a switch makes a closed circuit Opening a switch opens, or breaks the circuit
In a circuit, the purpose of a switch is to control the current flow to the load by opening the circuit (off) or closing the circuit (on). When the circuit is open, the is no complete loop through which the current can flow. When the switch closes the circuit, it restores the loop, and thus allows the current to flow.
This is what the purpose of a switch is. It connects the "hot" wire to the load. When this is done the load becomes energized.
It's an emergency cut off in case something happens to the operator. One example is the switch in the drivers cab of a train. So long as the switch is activated (by pressure from the drivers hand) - the train will move. If the driver releases the switch - the train automatically applies the brakes.
Thermostatic Expansion Valve
A thermostatic switch works by turning on when the temperature is below a certain point. A thermostatic switch will also turn off when the temperature reaches a certain point. Thermostatic switches are used for space heaters so that they do not overheat.
the thermostatic switch of the control of the compressor and control of colld of the system
The thermostatic switch is located near the top right hand side of the radiator (if your facing car).
The purpose of a thermostatic mixing valve is to mix hot water with cold water. This is what keeps the constant temperature in both bath and shower water.
Check the thermostatic switch
an automotive AC has a thermostatic switch that cycles the compressor on and off in order to control the temperature within the evaporator core and keep it within a certain range, much like the thermostatic switch in a refridgerator.
The thermostat fan switch can be found on the front of your 2.0 liter engine. The fan switch will be near the top of the engine.
May be a the rear side of the radiator approx. 1/3 from the top
It is mounted in the radiator, and is a thermostatic switch. It is located in the top left side near the fan itself. It is the only wired device in the radiator, so if you can see the wire, you got the switch.
No 240sx has a thermostatic air cleaner, only an air filter
A thermostatic clutch is usually used on a car's engine cooling fan. It uses a bi-metallic spring, which tightens and forces the fan to turn when the air temperature inside the engine compartment reaches a certain level. Basically is used to prevent the fan from wasting your engine's power when there is no need for cooling, by allowing the fan to freewheel when the engine is cold. It then serves as a device to automatically engage the fan and keep the engine cool when necessary.
only if you ride a stalion on and open range or if the sun spilled his milk when he realized his third nipple was covered by and eyepatch on his toe