Open the drivers door and look for an information sticker on the end of the door
that shows the axle code
" M " is the 2.73 Traction Lok ( most likely with the automatic )
" Z " is the 3.08 " " ( most likely with the manual transmission )
( also " E " was a 3.27 Traction Lok and " K " was a 3.55 Traction Lok )
The axle ratio on a 2007 Ford Mustang GT is 3.55:1
I had a 1991 Ford Mustang 5.0 L - LX - automatic , and it had 2.73 's
The gear ratio in the 1979 Ford Mustang turbo four is 3.45:1
The gear ratio for the 1979 Mustang V8 is 2.47:1
2000- 3000 lbs depening on the gear ratio
The axle ratio on a 1998 Mustang Cobra is 3.27:1
2.833 is the rear-end gear ratio
what is the axle gear ratio for a 1998 ford ranger 4x4 4.0l?
it has an 8.8 rear end with a 3.23 ratio.
In some 1982 Ford f100 trucks I know they have a 4.10 Gear ratio like my truck but with that gear ratio if you go over 55 mph you can say goodbye to your gas mileage so get a smaller gear ratio.
Typically 2.73 but it depends on if the original owner had another gear ratio put in during the manufacturing
9" Ford rear end, 9 or 11 1/1 to one gear ratio.
The gear ratio for a 1988 Mustang is 3.45:1 on a standard (four) and 3.73:1 optional (four)
A good majority of the 1984 Ford F150 gear ratio had 3.00 gears for the stock. In addition, the spline should be a 31.
hey there! can you remove hte tag on your diff cover oneof two tags tell you the gear ratio and wether its a limited slip or an open carrier usually for a gt mustang would be 3.73 ratio but it changes if automatic or standard trans,....
Should be 3.27
A 1990 Ford Ranger may not shift into gear if the clutch is out. A clutch can be purchased at any auto parts store.
It has a 3.27 gear on it, if upgrading i would suggest 3.73's or 4.10's.
how to remove a power steering gear box for a 1990 ford ranger 2.9
what is the rear end gear ratio on a 4800lb tow rating on a 2006 ford f-150 triton 5.4 litre 4x4 truck
I believe that is 2.73 ( axle code " M " )