0
most likely 3.54 but look for the tag on the axle.
Wiki User
∙ 14y ago
Add your answer:
Earn +20 pts
What is the rear end gear ratio on a 1989 Ford Bronco XLT?
3.55 gears
What is the rear-end gear ratio on a 1989 Ford Bronco XLT?
3.55 gears
What is the gear ratio for 1992 ford bronco Eddie Bauer?
most 1992 Eddie Bauer bronco's are 3.55 in the rear and 3.54 in the front. that's what mine is with a 351w (5.8).
What is the stock gear ratio on a 1998 ford ranger?
what is the axle gear ratio for a 1998 ford ranger 4x4 4.0l?
Why 1986 ford bronco crank but no start?
Is there just a gear or a timing chain on a 1985 ford bronco 11 2.8 liter V 6.
What is the gear ratio for a 1982 Ford F100 pickup?
In some 1982 Ford f100 trucks I know they have a 4.10 Gear ratio like my truck but with that gear ratio if you go over 55 mph you can say goodbye to your gas mileage so get a smaller gear ratio.
What is the gear ratio on an 89 bronco fwd full floating axle tag on door says 19?
http://www.off-road.com/trucks4x4/bigbroncos.tech/Bronco-Rear-Axle-Codes-and-Ratios/ArticleStandard/Article/detail/304644your gear ratio is 3.55
What is the gear ratio in a stock 1984 Ford F150?
A good majority of the 1984 Ford F150 gear ratio had 3.00 gears for the stock. In addition, the spline should be a 31.
What is the gear ratio on a 85 Ford Bronco?
There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires. 4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
What is the rear-end gear ratio on a 1987 bronco custom?
There are four ways to find a ratio. 1 A dealer can normally tell from the vin number. 2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement info. 3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires. 4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
What is the gear ratio of a stock 1997 ford ranger?
3.73
1987 ford bronco shift-on-fly transfer case it will shift into 4hi but when you try 4low it blinks what should you look for?
Did you try putting gear shift in "neutral" when shifting into 4 WD Low?
