If you have a 500 watt power supply and you want to put in a new video card. On the video card's box it will tell you how much power it needs. If it requires less power then you don't need to worry. If it says it requires more, you'll need a bigger power supply with large wattage otherwise you'll kill your computer.
The wattage of a BenQ computer can vary depending on the specific model and configuration. It is recommended to check the product specifications or contact the manufacturer for accurate information on the wattage of a particular BenQ computer.
No, it is not safe to exceed the recommended wattage on a fixture. The wattage rating indicates the maximum amount of power that the fixture is designed to handle safely. Exceeding this wattage can cause overheating, fire hazards, and damage to the fixture. Always follow the manufacturer's recommendations for bulb wattage.
JBL's brochure for the MR900 series shows the MR902 has a continuous power capacity of 250 watts and 1000 watts peak.
Wattage= current*voltage*power factor. Wattage=VI Cos(@)
The main piece of information needed is the load wattage or amperage that will be connected to the power supply. Once this is known the power supply of a greater size that the load should be chosen. Also with this information the size of the wires can be calculated from the power supply to the load. Too small a wire will create a voltage drop at the load end of the circuit. This will cause under performance of the load.
for sure
To know what size power supply you need, add up the wattage requirements of all components and add 30 percent.
Hi there guys, this is the answer you all looking 4.Add up all wattage requirements for all devices that will use the power supply and then add an additional 30%.
The equipments power requirements, and the mains voltage. The output of the power supply must be able to deliver the correct voltage to the equipment, at the appropriate wattage. Additionally, it should be capable of operating on the supplied mains voltage and wattage.
No, an inventory is what is in stock; a power supply powers an electronic device and determines wattage and voltage, usually from a wall outlet.
Find out what the VA capacity of the power supply is and then add up the connected load in VA (volts x amps). If the load totals are greater that the VA power supply capacity then this is where the heat is coming from. The power supply is overloaded. Remove some of the load or get a bigger capacity power supply.
Hit your computer with a bat until it opens up and you can find it that way. It is ok if only 2 parts break they r likely not important
Its usually written on a label on the outside of the power supply box. The number will specify Watts, i.e.150W for 150 Watts
Power supplies are rated at the maximum wattage they can put out. Of course, a computers requirements vary depending on what the computer is doing, so a computer power supply should be of the same, or greater, wattage requirement of the computer when under it's greatest load.
No attempt should be made to repair the power supply. The power supply should be replaced with a power supply of equal or greater wattage.
The higher wattage rating means that your computer will run more efficiently with more components (hard drives, DVD burners, high end video and sound cards etc.) without robbing power from the processor and mother board.
Yes. If the power supply is of a low wattage and has too many pieces of hardware connected to it, it can. Try buying a power supply with a wattage over 300. One thing to check before replacing the power supply is the voltage selector in the back. If you use 120 volt power, then setting the power supply to 240 volts will cause the PC to only get half of the power it needs. External peripherals with their own power supply will not impact the power supply or current in the computer. Printers and monitors usually get their power from the wall socket, not the computer, and the same goes for external modems that plug into the wall. Keyboards and mice take negligible power.