5500 RPM or 5 RPM below the banging knocking sound you just had .
The mounting bolts that attach the compressor to the engine.
1, 3, 4, 2.
By the way, it's a 2.5 Liter engine, the system saved it as a 25L for whatever reason.
Not much; they are a sled. Sorry, but I had one. Mark
It is my understanding that there were actually four different blocks that were all used for the 2.5L engine. The blocks used for the FWD engines are not the same as the block used with the rear wheel drive vehicles such as the S10. Differences include motor mount holes and starter locations. For the final answer put the two blocks side by side and make sure all the critical mount positions line up. If they do you can probably interchange them.
I have the EGR disabled on my 1990 truck, 5.7. If i can disable it on my truck without a problem, i cant see why a car wouldn't work, as the engine would be working less. 2 mpg increase in fuel economy. Apparently higher combustion chamber temps.
250ml = .25l
it is directly below the intake manifold on the engine block. i do believe it is the only 1/2 inch hose connected to the intake plenum.
You pull the trigger . :)
That is 5 litres
5/6 of 30L is 25L
25 litres of what? Depending on the density of the material, the answer varies. 25l of sand will weigh a whole lot more that 25l of feathers. If you mean water, 1l of water weighs 1kg, so 25l of water weighs 25kg. That is water at (I think) 20C at sea level. Hope this answers your question.