Under normal circumstances, the relationship is given by Ohm's law
voltage = current x resistance.
The ratio of voltage to current is called resistance. This is obtained from the definition of the ohm, and not (as so often stated) from Ohm's Law.
If the ratio of voltage to current is constant for variations in voltage, then the load obeys Ohm's Law and is called a 'linear' or 'ohmic' load.
If the ratio of voltage to current changes for variations in voltage, then the load does NOT obey Ohm's Law, and is called 'non-linear' or 'non-ohmic'. Pure metal conductors ONLY obey Ohm's Law if their temperature is held constant. No semiconductor obeys Ohm's Law.
Under normal circumstances, the relationship is given by Ohm's law
voltage = current x resistance. The ratio of voltage to current is called resistance. This is obtained from the definition of the ohm, and not (as so often stated) from Ohm's Law.
If the ratio of voltage to current is constant for variations in voltage, then the load obeys Ohm's Law and is called a 'linear' or 'ohmic' load.
If the ratio of voltage to current changes for variations in voltage, then the load does NOT obey Ohm's Law, and is called 'non-linear' or 'non-ohmic'. Pure metal conductors ONLY obey Ohm's Law if their temperature is held constant. No semiconductor obeys Ohm's Law.
Ohm's Law: Current = Voltage / Resistance
The amount of current that will pass through a resistance is dependant upon the voltage applied across the resistance. Voltage devided by resistance equals current. This is Ohm's Law.
An example of mass and resistance is voltage, we know that the following is the formula for calculating voltage: V = IR where R is the resistance and I is the current.
This is Ohm's law. It says that voltage (E) equals current (I) times resistance (R). It can be written three ways, and here they are: E = I x R I = E / R R = E / I Voltage and current are directly proportional. What happens to one will happen to the other. What this says is that for a fixed resistance, increasing the voltage will cause an increase in current. Or, said another way, to increase the current through a given resistance, the voltage must be increased. Further, if you double the voltage applied to a given resistance, the current will double. Simple and easy.
Resistance(Ohms)= Voltage(volts)/Current (Ampheres) -X
You do not need ohm's law to relate power to current and voltage. Power is current times voltage. If you know current and voltage, you do not need to know resistance.
Ohm's Law: voltage = current * resistance. If resistance is a constant, then voltage is directly proportional to current.
voltage depend on current and resistance r.p.m depend on no of pole
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
Voltage = (current) x (resistance) Current = (voltage)/(resistance) Resistance = (voltage)/(current)
how do you use ohms law express conductance in terms of current and voltage?
One way to determine current is to measure it, with an ammeter. Another way is to calculate it using Ohm's law: current = voltage / resistance.
Voltage = Current x Resistance giving us Current = Voltage / Resistance i.e. Voltage divided by resistance
Ohm's law gives the relationship between current, voltage, and resistance. The law states that I=V/R, where I is current, V is voltage, and R is resistance. Source: university digital fundamentals
V=IR where V is the voltage (volts), I is current (amps) and R is resistance (ohms)
This is because the resistance is measured by applying a fixed voltage to the resistor and measuring the current. Since I = V/R, the current/resistance relation is non-linear.
No. Voltage divided by resistance is equal to current.