0
What is the replacement of human operation and control of machinery with some form of programmed control?
Wiki User
∙ 10y ago
robotics
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
What is timing and control in computer architecture?
Timing pulses are used in sequencing the micro-operations in an instruction. For example, when LDA instruction is executed, the memory is read operation is performed in timing pulse T1 and memory writer operation is performed in timing pulse T2. Now the combination of the signal LDA and T1 can be used as a control signal for performing read operation. Similarly, the combination of the signal LDA and T2 can be used as a control signal for performing write operation.A master clock generator is used for controlling the timing for all register in a computer system. A state of a register cannot be changed by a clock pulse until it is enabled by the control signal, which are generated in the control unit and provide control inputs for multiplexers, processor register, and micro-operations. The control organization is of two types; hardwired control and micro-programmed control.Hardwired ControlIn a hardwired control, the control signals are generated by using the collection of combinational circuits. The main advantage of the hardwired control is that, it can be optimized to produce a fast mode of operation. Whenever a change or modification is to be done in the design, then the wiring among the various components needs to be done. Micro-Programmed ControlIn a micro-programmed control, a control memory is used for storing control information which is also programmed for initiating the sequence of micro-operations. Whenever any change or modification is required in the design, it can be done by updating the micro-program in the control memory.
What is the best definition of a Supervisor?
an individual who has the safety responsibility for workers who directly report to him/her within the organization and for the safe operation of facility or programmatic machinery and equipment under his/her control
If a computer cannot feel or think on its ownso how can it control a rocket in space?
It is wired and programmed to do it. I think. It is wired and programmed to do it. I think.
What is unit control?
A control unit in general is a central (or sometimes distributed but clearly distinguishable) part of whatsoever machinery that controls its operation, provided that a piece of machinery is complex and organized enough to contain any such unit. ...All steering devices with connections to the parent device and which can steer, direct, or change its operational parameters. This can be done by automatic, semi-automatic or manually operated commands.Source: google.com
What is a control unit?
A control unit in general is a central (or sometimes distributed but clearly distinguishable) part of whatsoever machinery that controls its operation, provided that a piece of machinery is complex and organized enough to contain any such unit. ...All steering devices with connections to the parent device and which can steer, direct, or change its operational parameters. This can be done by automatic, semi-automatic or manually operated commands.Source: google.com
Does your impala have to be programmed by a dealership when replacing the body control module?
yes
What is fault code P1613 on citroen C5?
Engine control module (ECM) programming malfunction. This means that either it is incorrectly programmed or not programmed.
Do you do a replacement remote control for squawkers macaw?
yes--where can i get a replacement ?
What is control unit controls?
A control unit in general is a central (or sometimes distributed but clearly distinguishable) part of whatsoever machinery that controls its operation, provided that a piece of machinery is complex and organized enough to contain any such unit. ...All steering devices with connections to the parent device and which can steer, direct, or change its operational parameters. This can be done by automatic, semi-automatic or manually operated commands.Source: google.com
What is the default parental control pin for comcast?
There is no default pin. The default is 'not programmed'.
Full form of CNC?
CNC, pertaining to industrial machinery, stands for Computer Numerically controlled machinery. The industry, in fact, everything you see, can hold, everything is manufactured on a machine. Most of which are CNC. CNC'sare basically lathes, mills with a computer control on it to load programs.
How do you control a company?
by auditing of procedures , operation and results we can control a company
