The boiling tube store
to prevent a buildup of pressure inside the tube
A boiling tube is used for boiling a liquid in
A small beaker.
A test tube (or sample tube) has no errors.
A boiling tube is used for boiling a liquid in
The boiling tube store
A sample tube, culture tube, sometimes a boiling tube.
A retort stand is to hold a test tube/ boiling tube. 1. Turn the side knob( by the "t" on the retort stand) and release it. 2. Put the test tube/boiling tube in the test tube/boiling tube holder. 3. TIGHTEN the side knob ( if not the test tube/ boiling tube will drop). 4. Adjust the height of the retort stand by turining the most corner knob. (if you need to)
A boiling tube is for boiling chemicals or metals, a test-tube is for holding chemical reactants. Test tubes are slimmer, boiling tubes are wide and are made of thin glass
sex
to prevent a buildup of pressure inside the tube
Provided that you use the wider kind of tube known as a boiling tube, this is not so. Of course it is dangerous to heat liquids in a narrow tube, as this can cause rapid boiling and the shooting of the liquid out of the tube.
You should only heat liquids in the wider kind of test tube known as a boiling tube. Using an ordinary test tube often results in rapid local boiling and consequent shooting out of the liquid, which is known as 'bumping'. That said, many people prefer to move the tube around in the flame at first to prevent uneven heating of the contents, and to produce smoother boiling. There is a very small chance that concentrated heating may put stress on a weak spot in the glass and cause it to break.
G
about 60cm3~
A boiling tube is used for boiling a liquid in