about 60cm3~
Depends on what kind of tire and tube. Mountain bikes how lower pressure, but a higher volume. Usually about 40 PSI. Road bikes have a higher pressure, but a lower volume. Mine are at 105 PSI when I ride.
400
i would say the head
this fails
When the liquid in the thermometer gets warmer it expands. This means its volume increases. The only place for the extra volume to go is up the tube, so the level of liquid rises. When the liquid gets colder it contracts (reduces in volume) so it moves back down the tube. See http://www.energyquest.ca.gov/how_it_works/thermometer.html
A boiling tube is used for boiling a liquid in
A retort stand is to hold a test tube/ boiling tube. 1. Turn the side knob( by the "t" on the retort stand) and release it. 2. Put the test tube/boiling tube in the test tube/boiling tube holder. 3. TIGHTEN the side knob ( if not the test tube/ boiling tube will drop). 4. Adjust the height of the retort stand by turining the most corner knob. (if you need to)
a test tube is the answer
Depends on what kind of tire and tube. Mountain bikes how lower pressure, but a higher volume. Usually about 40 PSI. Road bikes have a higher pressure, but a lower volume. Mine are at 105 PSI when I ride.
looking for length of tube if i.d is 93mm and is to hold 1ltr of fluid
A boiling tube is used for boiling a liquid in
The boiling tube store
Test tube racks are commonplace in school science labs and are used routinely to securely hold test tubes or boiling tubes that are being observed or filled.
A sample tube, culture tube, sometimes a boiling tube.
A boiling tube is for boiling chemicals or metals, a test-tube is for holding chemical reactants. Test tubes are slimmer, boiling tubes are wide and are made of thin glass
sex
75.4 cubic inches.