0
Go to the Wiki for OSI model -that discussion and listing is very good.
Wiki User
∙ 14y ago
Wiki User
∙ 12y agoyellow balls
Add your answer:
Earn +20 pts
Are network functions only associated with one layer of the OSI model?
No, At each layer, protocols perform servers unique to that layer. While performing those services, the protocols also interact with protocols in the layers directly above and below. In addition, at the top of the OSI model, Application layer protocols interact with the software you use. At the bottom, Phsyical layer services act on the networking cables and connectors to issue and receive signals.
Discuss role of protocols at different layers of the OSI model?
Protocols at each of the OSI layers govern how they are to talk to each other. Each layer of the OSI model has different responsibilities and they may have multiple protocols that they could use. The sender and receiver in networks must agree on a common ground for communication, which is the protocol. Depending on what you are trying to accomplish there are different protocols at different layers of the OSI model. Basically, you need the two systems to agree on how to do that. That is the role of a protocol.
What is the What is the difference between CAN 2.0 and J1939?
These protocols are higher level CAN bus protocols. They both use the CAN 2.0B standard for the physical and data link layer. Each protocol, however, has different standards for the higher layers in the OSI model, and thus the way in which data is transmitted and interpreted is unique to each.
Where data packets are transmitted through different layers of the OSI model?
The OSI Model was created based on recommendations from the International Organization for Standardization (ISO) in 1980, which started expanding on the DoD model in the late 1970s. The current standard was published in 1996. The official title for the model is the ISO OSI (Open Systems Interconnection) Reference Model since it describes or relates to connecting systems that are open for communication with other systems. In the model, the functions of the communication system are standardized by categorizing them into abstract layers. The functions which are similar are grouped into the same layer and provide services to the layers above theirWhat Does the OSI Model Do?The OSI model depicts how data communications should take place. It splits the functions or processes into seven groups that are described as layers. When protocols or other standards are developed by other organizations such as the American National Standards Institute (ANSI), Institute of Electrical and Electronic Engineers (IEEE), and the International Telecommunications Union (ITU) formerly known as the CCITT (Comite Consultatif Internationale de Telegraphique et Telephone), they are placed into a layer of the model to help with communication protocol integration and conceptual understanding. The majority of major network and computer vendors, large commercial entities, and governments support the use of the OSI model. Each of the layers of the OSI model is intended to function with those above and below it respectfully within the model definition. The OSI model defines standards for:The way in which devices communicate between each other.The means used to inform devices when to send data and when not to transmit data.The methods which ensure that devices have a correct data flow rateThe means used to ensure that data is passed to, and received by the intended recipient.The manner in which physical transmission media is arranged and connected.What Are the Seven Layers of the OSI Model?The OSI model is made up of seven layers which are presented as a stack. Each of the layers of the OSI model has a numerical level or layer, and a plain text descriptor. Data which is passed over the network moves through each layer. The seven layers of the OSI model are:Application Layer - layer 7Presentation Layer - layer 6Session Layer - layer 5Transport Layer - layer 4Network Layer - layer 3Data-Link Layer - layer 2Physical Layer - layer 1A common mnemonic used to remember the OSI model layers starting with the seventh layer (Application) is: "All People Seem to Need Data Processing." The lower two layers of the model are normally implemented through software and hardware solutions, while the upper five layers are typically implemented through the use of software only.Each layer of the OSI model has its own unique functions. The process of sending data is typically started at the Application layer, is sent through the stack to the Physical layer, and then over the network to the recipient. Data is received at the Physical layer, and the data packet is then passed up the stack to the Application layer.Different protocols operate at the different layers of the OSI model. Each layer of the OSI model has its own protocols. TCP and IP are collectively called the protocol stack or the network/transport protocols. This is due to the protocols operating at the Network and Transport layers to make it possible for computers to communicate. A protocol stack, r stack, is a group of protocols which are arranged in layers to enable communication. In the protocol stack, each layer provides services to the layer above it; and each layer also receives services from the layer beneath it. For two computers to partake in communications, each computer has to be running the same protocol stack. They can however have different operating systems.The published "advantages" of the OSI Model are: enhanced learning/teaching, reduced intricacy, modular engineering, interoperable technology, accelerated advancement, and standard interface definitions. Unfortunately; however, the OSI Model has not been found to map well to real world networking implementations or issues as the technical world has evolved. It is the most recognized model; however, and is still often used to describe networking protocols, gear, prob
Which layer of OSI model determines the type of communication?
The OSI model is a general model for networking . It has seven layer in total and each layer have some responsibilities. The layer that determines the communication mode is physical layer.
How does TCP and IP address works on networking?
TCP/IP is composed of layers, wherein each layer is responsible for performing certain operations on the data it receives and passing it to the higher layers. Each layer deals with certain issues related to the transmission of data and renders certain services to its higher layers. The TCP/IP model consists of the link layer, the Internet layer, the transport layer and the application layer. Each layer consists of a set of protocols that function on the level of that layer. The link layer protocols are responsible for connecting the nodes in a network. The Internet layer consists of protocols, specifications and methods that are used to transport data packets across the network. The transport layer protocols deal with the transmission of data packets between source and destination network hosts. The application layer, the topmost layer in TCP/IP, directly interacts with application services. Thus, we see that TCP/IP functions at all the levels of communication between the components of a network. It is truly, the heart of network communication.
Which layer of osi model layer Breaks up data into individual containers and assigns each a sequence number?
physical layer
Why tcp ip was adopted instead of osi model?
•The layers perform the same duties as in OSI, however, OSI's top three levels are combined into the single Application layer in TCP/IP.•It carries out all of the same functionality as those three layers in OSI.—In simple terms is a language that enables communication between computers—A set of rules (protocol) that defines how two computers address each other and send data to each other—Is a suite of protocols named after the two most important protocols TCP and IP; but includes other protocols such as UDP, RTP, etc.—The OSI model is a model comprises of 7 layers.—The TCP/IP model only has 4.—In reality the TCP/IP model was developed around about the same time as the OSI model which is why it is inspired by it but does not completely conform to the specifications of the OSI model.—The TCP/IP model is a description framework for computer network protocols created in the 1970s by DARPA, an agency of the United States Department of Defense.
What are the network addresses for each layer in the OSI model?
The OSI model is a simple framework for categorizing the different layers that make up network communication. There is no direct relation between the OSI model and any network address or protocol. In fact, most network protocols don't fit neatly in to the OSI model. TCP/IP, for example, spans the data-link, network, and transport layers.
What is the benefits of using layered network model?
The purpose of the layered model is so that devices and protocols can function independently of each other without affecting performance. For example, I can reach an FTP site (layer 7) regardless of if I am using physical cable or wifi (layer 1) and regardless of how my traffic is being routed through the world (layer 3). Considering the huge number of disparate operating systems and applications, it is easy to see the necessity of an open-systems interconnection model (OSI Model)
What layer of the OSI model is a Switch on?
It operates on the data link layer of the OSI model (level 2). The switch creates a separate collision domain for each port. Although some switches operate on level 3 of the model and are called multi-layer switches.
How osi layer works?
OSI model has seven layers and each layer is assigned a specific task for data transmission process.
