exfoliation
There are 3 types of weathering Physical Weathering which is split into two parts a.Freeze-thaw-as water enters cracks and holes it freezes and expands dueing for the rock to form cracks and breaking of the rock bunion skin (Exfoliation)-As the rock heats up and expands by day, and cools and contracts by night, stress is often exerted on the outer layers. The stress causes the peeling off the outer layers of rock in thin sheets. 2. Biological weathering- the roots and animals burrow into rocks which causes them to break. 3. Chemical weathering- mineral dissolving in the water makes the water acidic which then eats away the rock and sometimes causes holes.
following are the different layers of computer1:APPLICATION PROGRAMS/USER2:UTILITY3:O.S4.HARDWARE
UV lasers are good for analyizing top surface layers. It has a penetration depth of only a few nanometers, making it incredibly sensitive, even to very thin layers.
From multiple layers of veneer glued together.
none
The reason for this is because rust is weaker than iron and decreases strength. Iron rust flakes off and has holes in it that allow water and air to further corrode deeper layers of iron (like a pile of potato chips). Aluminium, stainless steel and other metals form a complete continuous layer and prevent further corrosion. It is not because of reduced surface area if anything the surface area is increased (especially with iron)AnswerI believe its because the overall surface area of the bar is decreased, hence the structural integrity of the bar is compromised. Strangely enough, when aluminum rusts the aluminum oxide on the surface of the metal increases resistance to further corrosion without reducing the surface area. love Tim xxx
Yes.
The surface.
Crust, mantle, core
what are movement of rock layers
To obtain a flaky pastry. The hard fat (butter or lard) does not melt into the flour but creates many layers of fat separated by flour. These layers become flakes when the pastry is baked.
stress changes the earth's surface by the way it looks and the layers.
The five layers of the atmosphere have different atmospheric temperature that occurs with increasing altitude. The layers also thin out with height from the surface.
To increase the surface area.
false
Aluminium does corrode. The difference between the corrosion of aluminium and the corrosion of iron (rust), is that aluminium corrosion is galvanic- the oxidised layer that forms acts as a very thin protective barrier to the aluminium beneath it in a process called galvanization, impeding the corrosion process. In comparison, iron oxide does not seal the metal beneath it, and successive layers are exposed and oxidised in turn.
They are egg layers and will lay their eggs on a smooth surface surface inside the tank.