0
What else can I help you with?
What is SCSI ID number for CD?
id 2
What scsi id should be assigned to a scsi-2 adapter card in a computer?
The host adapter is assigned SCSI ID 7, which has the highest priority over all other devices.
Which ID number is normally assigned to the SCSI controller?
The ID number which is traditionally assigned to the SCSI controller is ID 7. ID 7 is given the highest priority during bus arbitration.
You purchased 2 scsi devices which are both set to the same id by default. how can both be used on the same scsi controller?
You change the ID of one of them. You change the ID of one of them.
What is a task that you have to perform when installing SCSI devices?
Assign each SCSI device a unique ID number
How many different scsi id values are there for a computer?
8 or 16 depending upon the SCSI hardware being used. In a narrow bus, you can use a SCSI ID of 0-7, and in a wide bus, you can use 0-15.
The SCSI ID identifies the logical device?
false
Which id should not be used while assigning ids to SCSI peripherals?
When assigning IDs to SCSI peripherals, ID 0 should generally not be used for devices other than the SCSI host controller itself. This is because ID 0 is typically reserved for the SCSI initiator, which is responsible for sending commands to other devices on the bus. Using ID 0 for other peripherals can lead to conflicts and communication issues within the SCSI chain. It's best to allocate IDs 1 through 6 or 7 for other devices, depending on the SCSI standard in use.
What happens if two devices have the same scsi id assigned?
. goodbye.
What SCSI ID is often used for a boot device?
The SCSI logical unit number for boot devices is almost always zero(0).Matt Friend
Which scsi id number is recommended for the cd-rom?
ID3. Every other device can be set to any number as long as it's not in use. It is a recommended practice in IT comunity to set the scsi ID number for CD-ROM drive to 3.
How many devices can be connected in a SCSI chain (plain SCSI)?
In a plain SCSI (Small Computer System Interface) chain, up to 8 devices can be connected, including the SCSI host adapter. This means there are 7 additional devices that can be connected to the chain. SCSI IDs range from 0 to 7, with each device needing a unique ID for proper communication.
