1/2 inch. that's it!
The alternator on a Ford E150 van is replaced by loosing the retaining bolts, removing the belt, disconnecting the wiring harness, and unbolting the alternator. A replacement alternator can then be put into place and reattached.
How do I replace the heater core in a 1999 Ford e150 conversion van
The alternator is weak or the belt is slipping.
The fuel pressure regulator on a 1999 Ford E150 Van is located near the carburetor in the engine compartment. It is to the right and in front of the carburetor.
The Ford Ranger alternator bolt torque specification is dependent upon the year of the Ford Ranger. In general, the alternator bolt torque specification is 45 pounds.
5 by 5.5" or (139.7)
It is located on the Left Side ( facing the engine) by the Alternator.
Bolt Pattern: 5-139
center manifold for a 1999 ford van
more than likely in steering column
There is only one coolant temperature sensor on a 1999 Ford E150 6 cylinder. The sensor is on the front of the engine just below the valve cover.
loosen the bolt on the tension pulley. then insert a 3/8 ratchet in the square hole on the pulley that will loosen the belt