0
Usually copestone is used to form the sloping to course of a masonry wall. However if the client wants another type of stone, depending on how strong the wall has to be, there may be other possibilities.
Wiki User
∙ 10y ago
Add your answer:
Earn +20 pts
How long must a ladder be to reach the top of a 20' wall if the ladder and the wall form a 32 angle at the top?
23.53
Is there a pentagon pyramid?
Yes. A pyramid has sloping triangular sides meeting at a common vertex on top. Some naturally occurring crystal forms of pyramids have as many as 12 sides.
Can you use floor tile on the wall on top of old 4x4 tile?
I wouldn't recommend it. Most wall tiles are very smooth and wouldn't have any grit for the thin-set to adhere to.
A 13 foot ladder is leaning against the top of a wall so that the base is 5 feet from the base of the wall What is the height of the wall from the ground?
18
Area surface of a prism?
The surface area of a prism is calculated by adding the area of the walls to the area of the top and bottom. The area of the walls is calculated by multiplying the perimeter of the top by the height of the wall.
Masonry used to form the sloping top of a wall?
Copestones
Masonry used to form the sloping top of wall?
Copestone! Tony W
What is a copestone?
Also called capstone, it is the top row of stones in a masonry wall.
What is a Penthouse?
1. a. An apartment or dwelling situated on the roof of a building.b. A residence, often with a terrace, on the top floor or floors of a building.c. A structure housing machinery on the roof of a building.2. A shed or sloping roof attached to the side of a building or wall.3. Sports The sloping roof that rises from the inner wall to the outer wall surrounding three sides of the court in court tennis, off which the ball is served.
What is the best way of securing decking on top of a brick wall?
I would drill into the brick with a hammer drill and a small bit and use a masonry screw. Lowe's has hammer drills in the $79 - 99 range, or you can rent them at a variety of places. Make sure you are using a hammer drill bit designed for masonry.
What is coping brick?
"Coping brick" is generally a brick or masonry structure placed on top of a wall to cap it off, providing a finished look. It helps prevent water from seeping into the wall below and adds architectural appeal to the structure.
Huge tomb with square base and sloping sides meeting at the top?
A pyramid.
When the coefficient of x is positive the line is?
Sloping upward (from bottom left to top right).
I am building a 2'6 wall for a garden that will be filled with dirt should i re-bar the wall?
Yes, if you are constructing this wall with concrete block you will need #5 rebar dowels stubbed out of the foundation at 32" on center. You will also need one #5 rebar running continues in the top course and fill all cells with dowels and top course with either structural grout or concrete.
The top of the foundation wall?
....is the top of the foundation wall. Simple as that.
Can you build a wood fence on top of a masonry block foundation to achieve eight foot height?
You can as long as you anchor it properly. Depending on how high the wood section is going to be, you would either bolt it down to the top of the block or extend the posts part way down the face of the wall and anchor it that way.
What geographic term descibes a hill with sharply sloping sides with a flat top?
butte butte
