What's the gap size for a 1.6 Mazda
The recommended spark plug gap is .044"
thermostat is located where the lower hose conects to the engine
A spark plug for a 2003 Mazda Protege has a 14 mm thread size, and a 19 mm reach. The gap is 1.1 mm.
2000 Mazda Protege 1.6L MFI DOHC 4cylThe Spark Plug Gap.044 (In thousandths of an inch)
car stalled at red light and will not start. there is no spark from spark plug, help!
.044 is the proper plug gap setting.
You have either a blown head gasket or a cracked head
Spark plug wire layout is also known as firing order. The correct firing order for the 2000 Mazda Protege 1.8L is 1-3-4-2 with a counterclockwise distributor rotation.
The spark plug gap recommended by the owners manual says anywhere between .040 and .043 inches. NGK, a spark plug manufacturer recomends .044 inch spark plug gap.
the factory plugs gap is 0.028" - 0.032".
Bottom of the engine on the oil pan.
spark plugs for vehicles with electronic ignition come pre gapped when purchased .044
The spark plug gap for a 1985 B2000 Mazda with a 2.0 liter engine is .8 mm. This is equal to .031 inches.
The ignition coil is attached the cylinder 1. It's a metal box that the spark plug is attached to. On the 2.0L engine, there are two coils mounted in the cylinder head atop the engine.
The spark plugs are located at the top of the engine block. Two have Plug Wires going to them the the other two have the coil already attached to it. These can be remove with a 10mm socket. Gently pull up on the plug wires as to not break the connection from the wire to the Plug Wire socket. Hope this helps.
The correct spark plug gap is 0.052 inch. Try to look for spark plug brands that fit the Mazda M.P.V. engine and already has the factory gap set near to this correct setting.
Follow the plug wires back to the distributor cap. On my 93 DX it is on the drivers side of the engine block underneath the air intake assembly.