it is 0.80mm
gr8 gr8 gr8
In your tool kit you should have a rench that will fit on the plug. You pull off the spark plug wire and take out the spark plug. Make sure the gap is set right for the new plug and put in in. Do not over tighten.
NGK CR8EH-9 Projected Resistor Type Spark Plug Have fun :-)
Underneath the direct ignition. You have to unscrew four torx srews
Depends on what model and where you live? Mopeds are worth less in more rural areas and worth the most in any city...in excellent condition...Yamaha chappy- 500-1200$, Yamaha qt50 200-750$, Yamaha Towny 400-900$, Yamaha champ 500-1200$, the more rust and the more plastic the bike has on it the less its worth...
Remove the spark plug wire on the right side of the motorcycle. It's at the top of the motor, at the front of the fuel tank. You will need a special spark plug socket to remove the spark plug. Wherever you get the new spark plug's, they can get you the correct wrench. Put a 3 inch extension on the socket, It should go all the way down to the spark plug, and have just enough room to get you're drive ratchet on it to remove the spark plug. When you have screwed the spark plug all the way loose, You will need to remove the ratchet to pull the extension out with the socket, and the spark plug in the end of the socket. There should just be enough room to remove it. I had to remove a breather hose at the bottom of the fuel tank to fully remove it. Put the new plug in, Make sure it is secured in the socked, Mine dropped, and when I retrieved It, It had messed up the gap setting. The other one is on the other side at the rear of the fuel tank. You will need to remove the two bolt's at the bottom of the tank, and pull up on the tank, and prop it up with a WD-40 can so you can get the proper clearance to remove the second one. I found it easier to remove than the other one. There was no hose to remove.
2
Yamaha CPX 900
Yes, I've seen a few in this price range.
About 900 hp
Yes, but you'll need to download free software from the Yamaha website to convert the styles.
how do you take ignitions off cbrr 900 95 what kind of screw is that