0
It depends on the speed of the motor that is driving the fan. There could be millions of answers to this question. I believe the questioner has asked the question wrong.
Wiki User
∙ 16y ago
Add your answer:
Earn +20 pts
What does no load speed mean?
It is the speed you electrical drive device will run when it is just running but has not load. This would apply to: a furnace fan motor (or any motor) not connected to the fan a pump that is running but is not pumping anything a blender with no mixing container on top And so on
What are ceiling fan capacitors for?
There are a variety of capacitor sizes in ceiling fans. The capacitor is dependant upon the characteristics of the fans motor. Whether it is a single speed, two speed or three speed. If you think it is the capacitor at fault for the fan not operating, take the fan down and open it up. This will give you the exact sizing for your fan.See sources and related links below.
When speed of fan is increase what is effect on voltage?
voltage would go up typically (you would raise the voltage, not the fan circuit), but it depends on the motor
Which motor is used in low speed applications?
Some motors are specially designed for low speed. Some are "invertor Duty" classified so that they can be run on invertor (VFD) normally with a high heat dissipating design. On low speed the cooling effect reduces drastically since the cooling fan is mounted on the same motor shaft. Hence a separate small cooling fan is mounted on the motor, driven by separate power such that it keeps running at normal speed irrespective of main motor speed, thus providing the required cooling effect.
Why fan motor is not self started?
Why fan motor is not self started?
Can you reduce the speed of a fan motor with a dimmer switch?
no you can not
What is the problem your fan and ac only works on speed 4?
Your fan motor is going out.
Why does cooling fan on 1996 mustang gt not work right does not run on high speed when it should?
Fan blower motor?Hi-speed relay badSwitch?Motor winding bad
How the fan regulator conrolled the speed of fan?
Through a restrictive process of limiting the amount of electricity to the fan motor.
What is the problem when the AC Fan on my 1999 Ford E150 only blows on low and changing the fan speed setting has no effect on the fan speed?
Could be a bad fan motor resistor
1993 Chevy pu you have no low or med blower motor speeds you have high only you have checked all the fan speed relays resistor fan switch and blower motor all ok What to do next?
Resistor pack on blower motor? Fan switch? Low speed relay?
How do you replace a 3 speed ballast with a 2 speed ballast in a fan?
Ballasts are not used with motor control.
How do you adjust furnace fan speed?
Re tap the motor to a higher or lower speed, assuming it has that capability.
Where is high speed fan fuse on a 79 trans am?
there is no fuse. for the high speed you have to have a working A/C motor
How can you calculate the flow of FD fan and motor power when you know fan speed and impeller diameter?
times by 2
Where is the fan speed resistor in a 1990 Honda Accord?
The a/c fan motor resestor pack is on the evaporator case.
Why Fan works only on high speed?
More than likely the blower motor speed resistor is burned out.
