0
What else can I help you with?
What is the difference between intel 8085 and zilog Z80?
1.8085 has multiplexed data lines where as Z80 does'nt has multiplexed lines. 2.8085 operates at 3-5MHz clock freq,But clock frequency of Z80 is 4-20MHz. 3.8085 contains 74 instructions and Z80 has 158 instructions. 4.8085 has 5 interrupts but Z80 has only 2. 5.8085 has no index register but Z80 has 2. 6.8085 contains SIM & RIM instructions, but Z80 does'nt .
Draw a Z80 processor and explain five of its pin function?
draw the Z80 processor and explain five of its pin function
List some information about the Z80 processor and the transistors it contained?
Z80 contained 8.500 transistors. See the site I linked below for more information.
Can you program a z80?
Yes, I can help you program a Z80 microprocessor. The Z80 uses assembly language, which consists of mnemonics for instructions that the processor can execute. If you have specific tasks or programs in mind, I can guide you through the coding process or provide examples. Let me know what you need assistance with!
Program in TI Basic for the 15 MHz Z80 instead of for the 6 MHz Z80?
The TI-83 Plus has a clock speed of 6MHz. The newer TI-83 Plus Silver Edition and the entire TI-84 Plus series have a 15MHz clock speed, but usually run at 6MHz for compatibility with the older 83+. Assembly programmers can switch between the two speeds with a simple command. Unfortunately, BASIC programmers can not. They can use an assembly program that will do it for them, though.
How many pins are present in Zilog 80?
The Z80 has 40 pins.
Zilog Z80 MOS 6502 Intel 8080 and MC 6809 are?
8 bit microprocessors
Where is the location for address memory map in the Z80 simulator?
It depends on the particular simulator. You need to be more specific in your question.
Why is the Op-code the first part of an instruction loaded into the instruction register of the CPU?
Not necessarily. Some processors (Z80, for example) allow "prefixes" before the op-code.
What has the author C Lorenz written?
C. Lorenz has written: 'Z80 Assembler Handbuch' -- subject(s): Assembler language (Computer program language), Programming, Zilog Z-80 (Microprocessor) 'Msdos' 'Softwarehandbuch' -- subject(s): Microcomputers, Programming
What 3 companies formed the 1977 trinity?
Commodore Computers for their PET PC (Based on a MOS 6502 CPU),Tandy for their TRS-80 PC (Intially based on a Zilog Z80 CPU), andApple for the Apple II PCs (MOS 6502 CPU).
What is advantage of rotate with carry in z80?
The Z80's rotate-with-carry instructions, RRC and RLC, for Rotate Right and Rotate Left, are great for taking action based on individual bits being set or cleared. If you start with a clear carry flag, then get a byte from wherever, then you can rotate left or right one bit at a time. The bit you want to examine will eventually be in the carry. Then, execute a JP C, (location) or JP NC, (location) to jump based on whether or not the bit is set. (Of course, you could also use JR). The beauty of RLC and RRC is that they don't destroy the byte that you are using - after doing enough rotates, the byte will be as it was before.
