It is a idler pulley.
This is an easy one. There is a belt tensioner on the How_do_you_change_a_serpentine_belt_on_a_1992_Chevrolet_G20_vanof the engine which applies tension to the serpentine belt. A small wheel rides above the belt and applies the tension. Put a ratchet and socket on the bolt found in the center of the small wheel. The wheel and arm it is attached to will move up as you apply pressure to the ratchet. It is only necessary to move the small wheel and arm a short distance in order to slip the serpentine belt from under it.The trick will be replacing the belt. If the label showing the routing of the serpentine belt is missing (usually on the air intake pipe) draw a diagram before removing the belt.
check the serpentine belt .also check all the pulley wheels especially the belt tensioner.one of the pulley wheel bearings may be badAnswercheck the serpentine belt .also check all the pulley wheels especially the belt tensioner.one of the pulley wheel bearings may be bad
on the passenger side of the engine in along the serpentine ,between the power steering pump and the alternater . It is a wheel about 4 1/2 in. diameter with one 14mm bolt in the center.
That is static balance, basic, but not as important as dynamic balance.
No , a 1986 Chevy Caprice is REAR wheel drive
How to remove steering wheel on Chevy lumina 2000
How to remove steering wheel on a 2001 chevy tohoe
Remove the tire and wheel from your Chevy Cavalier. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing.
How do you engage four wheel drive on 1995 Chevy S-10?How do you engage four wheel drive on 1995 Chevy S-10?
YES, there the same wheel.
All years of the Chevy Celebrity model are front wheel drive.
how do you replace the rear wheel bearing on a Chevy pick up