There are four ways to find a ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement
info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
no
Could be either 3.07 to 1 or 3.73 to 1 Both were an option.
you can clear 31 x 10.5 they rub just slightly if you go over some real huge bumps
no they won't fit,diferent bolt patern
AMC 4.0L inline six
I have a 2002 Wrangler sport with a d30 front and d35 rear
Dane 35 or Dana 44
If its stock it should have a Dana 30 up front and a Dana 35 in the rear and most likely the gear ratio is 3.07 i have the same vehicle and that's what i found on mine which was completely stock when i bought it Nic
Most likely ax15 for the 4.0 and the ax5 for the 2.4
Either 3.07 or 3.73 to 1
The sticker on the drivers door jamb should have it listed.
The 2002 Jeep Wrangler has 8 valves.