There are four ways to find a ratio.
1 A dealer can normally tell from the vin number.
2 There are normally tags or labels on the axle that have part number, gear ratio, and fluid requirement
info.
3 You can count how many times you have to turn the driveshaft to get one complete turn of the tires.
4 You can divide the number of teeth on the ring gear and divide by number of teeth on the pinion.
3.07 or 3.73 to 1. Could be either.
Yes, it is laminated glass.
No.
50/50
Jeep Wrangler wheel lug patterns years 1987-2006 are 5X4.5Jeep Wrangler wheel lug patterns years 2007-2014 are 5X5
Yes, they are both TJ's and it should be a match.
I use 35psi for street.
Because your oil pump and/or oil pump bearings are dying.
These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92 These were the options in 2000: [DMC]=Axle Ratio - 3.21 [DMD]=Axle Ratio 3.55 [DMF]=Axle Ratio 4.10 [DMH]=Axle Ratio 3.92
When you first buy the wiring harness for your hardtop, you would have been sent a larger reservoir to replace the stock one that is used only for the front windshield, so there is one reservoir for both, only if you have a hardtop, your reservoir should be bigger hope this helps
yesmy 2000 jeep wrangler has cherokee srings instead of its stock springs it lifts it a little and rides great and is a direct fit
No.