Usually, the one that is solid has a higher molecular weight
temperature
Evaporator Approach is the difference between the evaporating refrigerant temperature - measured at the well in the evaporator -and leaving chilled water temperature.Take all readings with the water cooled chiller at full load.Condenser Approach is the difference between the liquid refrigerant temperature - as measured on the liquid line - and leaving condenser water temperature.
Evaporator Approach is the difference between the evaporating refrigerant temperature - measured at the well in the evaporator -and leaving chilled water temperature.Take all readings with the water cooled chiller at full load.Condenser Approach is the difference between the liquid refrigerant temperature - as measured on the liquid line - and leaving condenser water temperature.
density difference is decreasing when the temperature rises with liquid chlorine.
Such thermometers are based on the fact that the liquid expands when the temperature increases. That's what the thermometers measure.
Liquid nitrogen is made by taking in air from the atmosphere and compressing and cooling it. Once it is cool enough, it forms a liquid. This liquid contains argon, oxygen and nitrogen. These elements are then separated and sold as a commodity. The temperature is the only difference.
A liquid gas solution is a liquid made up of an element(s) that are normally gas at room temperature. A liquid solid solution is made up of an element(s) that are normally solids at room temperature... Which is around 21 degrees Celsius.
is there a chemical difference between the solid and liquid states of nitrogen
Flash point is the temperature at which a flash will occur across the face of a liquid and go out. Fire point is the temperature at which a flash will occur above the liquid and the resultant fire will continue to burn.
relative humidity is the AMOUNT of water in the air. Dew Point is the TEMPERATURE at which the water vapor in the air is turned into liquid water.
Fats:are solid at room temperaturemade by animals, mostlyare more saturatedOils:are liquid at room temperatureare made by plants, mostlyare less saturatedBoth are lipids. The main difference is that oil is liquid at room temperature, and fat is not.
A gas is the normal state for a material at given temperature while a vapour is made from some particles that have escaped from the liquid surface.