defination of suddenly applied load
NO LOAD:--- as it is very clear from the word itself that it is no load that means no load has been applied to the machine..i.e.the output terminal of machine is open circuited FULL LOAD:-- the maximum load value that can be applied to the machine at which it can work without damaging any part of the machine is called machine working at full load.
The reason an AC voltage applied across a load resistance produces alternating current is because when you have AC voltage you have to have AC current. If DC voltage is applied, DC current is produced.
To calculate the safe working load of a ship's bollard, you need the working stress and the force applied. These two will help you compute the safe working load.
when a resistive load is applied there is no phase angle difference between voltage and current. when a inductive load is applied there is phase difference between voltage and current. current lags voltage by an angle of 90 degrees for pure inductive load
.24
defination of suddenly applied load
defination of suddenly applied load
Stress suddenly applied load = 2 x stress gradually applied
The maximum stress induced in a body due to suddenly applied load is twice the stress induced when the same load is applied gradually
It is a load applied slowly rather than quickly or suddenly. If applied quickly, the problem becomes one of dynamics, or impulse loading, but if applied slowly (gradual) it is a statics problem
The only difference between a shock load and a gradually applied load is something called an impulse; defined as the integral of a force with respect to time. When a force is applied to a rigid body it changes the momentum of that body. A small force applied for a long time can produce the same momentum change as a large force applied briefly, because it is the product of the force and the time for which it is applied that is important.
The applied load refers to the load which acts on a structure at a given location or series of locations. The reaction is that which balances the applied load at the specific boundary (reaction) loactions. The sum of the applied load is equal to the reactions in the axis of application. For equilibrium, the sum of all forces and monemts are zero, so reactions may contain moment terrms under applied load, even if the applied laod has no applied moment.
The load conductor is connected to the load side of the generator breaker. Once the generator is up to speed the load breaker is closed and the voltage is then applied to the load.
stress is defined as the ratio of applied load and area. stress=applied load/area.
Axial load (or thrust load) is a force applied parallel to the longitudinal axis, whereas, a radial load is a force applied transverse to this longitudinal axis.
it is the ratio of buckling load to applied load
when the load is applied in the beam then deflection takes place. the nature of the deflection depends on the support provided on it