Bicycle tire inner tubes tend to have 10-15 psi of air pressure, so the air tends to be the same temperature as the ambient air temperature.
Bicycle tube valves are one-way valves. They let air pass one way, then holds it in.
A tube of a bicycle filled with air is considered a closed system. This is because the air inside the tube is contained and does not exchange matter with its surroundings, although it can exchange energy in the form of heat. The system remains closed to the entry or exit of air unless the tube is punctured or removed from the wheel.
To properly inflate a bicycle tube using a bicycle tube valve, first remove the valve cap. Then, attach the pump nozzle securely to the valve. Pump air into the tube until it reaches the recommended pressure level, which is usually indicated on the side of the tire. Finally, remove the pump nozzle and replace the valve cap.
A Bicycle Pump is used to pump the tyres on Bikes it is normally a simple hand operated device which pushes air through a tube atached to a nozel which is screwed to the Valve on a Bicycle inatube the air is then forced into the Bicycle Tire.
Usually the pump or compressor just takes air from the surrounding and pushes it into the tube/tire.
To measure a bicycle tube size accurately, first remove the tube from the tire. Then measure the diameter of the tube and the width of the tire. Use these measurements to determine the correct tube size for your bicycle.
The recommended tube size for a bicycle tire that is 700x35c is a 700x35-43c tube.
breather tube breather tube
Inspect the inner tube, if puncture is small, use a repair kit and put air in, if it is large (unlikely) you need a new tube
If the pump, valve, and tube are OK - yes.
A mercury-filled glass tube that measures air temperature is called a mercury thermometer.
The air temperature sensor on a N16 Almera is on the air intake tube. It is between the throttle plate and the air filter.