Most household paints are measured in Mils. One mi is about the thickness of a page from the phone book (Remember those?).
The application rate is one measure - wet mils, while the resulting dry and cured coat is dry mils.
A common specification is latex wall paint at 6 mils wet per coat for a 4 mil dry coverage.
The thickness of paint depends on the type of paint and how it is applied to a object. Most paint has a average of footage covered listed on it's container.
A gallon of paint covers about 300 square feet at a usual thickness of one coat; your example of 0.1 cm thick is very thick coat, equivalent to about 6 coats of paint at least; you could cover about 300/6 =50 square feet at that thickness.
DFT means Dry Film Thickness... The thickness is measured in terms of microns (one millionth of a meter). The instrument used is micrometer gauge or micrometer gauge.
a coat of paint
Automotive paint is applied in several thin coats each coat about 3 microns wet. Final thickness is about 25 microns
All distances are measured in metres. Prefifixes are used as abbreviations for the fraction of metres, because paint is thin, it would be measured in millionths of a metre. The prefix for millionths is micro-, so paint thinckness would be quoted as micrometres (μm)
The possessive form is the paint's thickness.
Coat of Paint
A paint thickness gauge will allow you to find out the thickness of the paint you are using. This means that when this is necessary for particular tasks that you have a good tool to help you.
An instrument called micrometer is used to measure paper or card thickness.
In typesetting, the thickness of a line is called its weight and is measured in points.
New Coat of Paint was created in 2000.
Usually there is a base coat of a solid colour, a coat of the chameleon paint, and then a clear coat