A ream (500 sheets) of 20 lb office paper is just under 2 inches thick, so one sheet cannot be 0.001 (one-thousandth of an inch). It's closer to 0.004 inches (more like 0.0038).
At 25.4 mm per inch, this gives us about 0.09652 mm, or just under one-tenth of a millimeter thick.
The thickness of a common sheet of paper is 0,01 mm or 10 micrometres.
.000001
25 cm
The easiest way to do this is to measure a large amount of paper sheets and to divide it. I have already done so the average is 0.049 millimeters per sheet.
This cannot be done very accurately. However, take enough sheets to make a stack sufficiently high to correspond with the length of the metre rule. Divide the number of sheets by a metre. That will give you the fraction of a metre that one sheet makes.
Depends on what paper you're talking about. The average sheet of 20lb copier paper is 0.0038 inches thick; whereas the average sheet of cardstock is 0.0175 inches thick. For a great resource of various thicknesses visit http://iconix.biz/info/paper-weights.htm
An instrument called micrometer is used to measure paper or card thickness.
Thickness of a sheet of paper would not be measured in feet, but possibly in inches. An average sheet of typing paper is about 1/200 of an inch.
about 25cm
The common paper thickness is approximately 0.1 millimeters (.0039 inches).
25 cm
Length X Width X Thickness. A sheet of aluminum foil does have a thickness. A typical sheet has a thickness of about 0.02 millimeters. There are, of course, thicker and thinner sheets.
Measure the thickness of multiple sheets (Say, ten or twenty) then divide the answer by the number of sheets to get the thickness of a single sheet.
how thick is the paper? example-1mm thick paper (1x2x2x2x2x2x2x2 ect. till youve multiplied 50 times and that equals the thickness in millimeters, all you have to do them is convert the millimeters into miles
The easiest way to do this is to measure a large amount of paper sheets and to divide it. I have already done so the average is 0.049 millimeters per sheet.
Calculate the thickness of a sheet of notebook paper in mircrome
Folding the piece of paper does not change the thickness of the piece of paper. However, the thickness of the folded paper would be twice that of the original sheet of paper.
stack up 100 of the same type of piece of paper, measure the thickness with a very accurate ruler, divide this thickness by 100
One with length and breadth, but no thickness. You could it out of a sheet of paper.