Want this question answered?
remove the neg battery cable then the wires on the starter. Then take out the mounting bolts and work the starter out.
The 1994 Toyota pickup truck starter mounting bolts can be found on the head of the starter. There will be three mounting bolts.
The starter on a 1998 Toyota 4runner is held located on the transmission housing. The starter is held on by 2 bolts which mount it directly it the engine. Remove the two bolts to replace the starter.
Replacing a starter on a 1989 Toyota Corolla is not very difficult to do. The wires will need to be disconnected from the old starter and labeled or taped. The starter is held in place by two bolts, unscrew the bolts and remove the old starter. Then replace with the new starter.
Should be 4 bolts (one in each corner)
I believe the correct answer is 2 bolts
It's on the transmission, two 14mm bolts.
Remove the battery and the cruise control actuator. The starter has two bolts holding it in. Remove the bolts and wiring, then install the new starter. Re-install the cruise control and battery.
there are bolts in between the cushions where the top and bottom meet. you have to spread them apart to get a good look at them
remove battery and tray, two, 17mm or 18mm bolts hold starter on. one on top of starter and one on bottom
The starter is located on the driver side of the under the intake maniford it has two bolts 14mm to remove it.
You should remove the positive cable from your 1996 Toyota battery. Remove the cables from the front of the starter. Remove the starter retaining bolts. Reverse the process to install the new starter.