Want this question answered?
Dwell should be 28-32 (approx. .016) Don't remember timing settings sorry
30 degrees and 8 before tdc
relaxing
go with 27 on the dwell and 4 btdc on timing
At least in the model year of 1971 the correct timing is set with the vacuum hose to the distrubutor disconected and the headlights on (not hi-beam) to 6 degrees... adjust dwell (point gap) before timing.
Use Chiltons repair manual for the model year. Then you will find the engine specs. The points gap at 0.019 and the dwell will set at 30 The timing should set between 8 to 10 degrees before top dead center. Remember that changing the timing will change the dwell. Timing changes the dwell. but the dwell don't change the timing. So set the timing first.
timing: 5 degrees btdc. electronic ignition sets dwell automatically. timing: 5 degrees btdc. electronic ignition sets dwell automatically.
no.
Point gap is 19 The dwell is 28 to 32
Dwell=30. Timing +6
28 to 32 degrees on the dwell, if you set it at 30 you will be perfect.
28/30 degrees on the dwell, the timing differs depending on the vehicle, start at 8 degrees before top dead center, it should run