Want this question answered?
not very well. a 4 ton system needs about 1600 cfm to provide it's full capacity of cooling. a 3 ton furnace puts out about 1200 cfm. in addition, the evap coil typically attached to the furnace needs to match the tonnage of the outdoor unit. so, the evap coil must be 4 tons. If you currently have a 3 ton furnace and evap coil, the system will not work, and you will most likely ruin the compressor in the outdoor unit.
One ton =12,000 btu's. A 5 ton unit would provide 60,000btuh of cooling. lc Refrigeration is the ability to remove heat. Like anything else distance,weight, temperature etc. there is a need to measure it. Tonnage is the unit of measure used to express refrigeration capacity.
To strain waste particles in chilled water
It is a 1-1/2 ton: 18000 BTU (unit size)/12,000 BTU (per ton)=1.5
dertty evaporator coil , low charge ,restriction on any of the line condenser fan diffectedType your answer here...
The B19 is the model or series. The 51 is the tonnage( the unit is actually a four ton unit with the coil being a little bigger for increased efficiency.
Looks to me to be a ton and a half.
The question is too vague, It depends on the Tonnage (BTU's) and or the Horsepower of the fan motor.
What is the tonnage of a carrier ac unit 24ABB360A0032010
model # GMP050-3 what is the tonnage of this unit
Tonnage means the about something weighs or the amount of BTU’s a unit puts out. . The lennox model HS19-311U-2p is a 2.5 ton unit and has a tonnage of 2.5 BTU's.
That's a 4 tonne unit
how to find out tonage
Net Tonnage
2 tons.
4tons
The Tempstar AC model NXA636GKA100 number is a quality air conditioning unit. The tonnage number refers to the amount or unit of cooling and the seer number is for the efficiency. This model has different unit numbers to determine the tonnage and seer numbers.