Want this question answered?
Herad torque is 100-110 Newton metres sequence is 7 3 1 5 9 8 4 2 6 10 hope this hgelps Mike 2
If you are meaning the tightening sequence, a "star" pattern is the most universally accepted method. Choose one lug as as a starting point and then crisscross to the farthest away in a star pattern. Be sure to "seat" the lug nuts first before applying final torque.
Torque settings for FL6 Volvo
The lug nut torque for that 1993 Volvo 960 is 63 ft.lbs.
The 'Torque measured' amount on a Volvo mini digger is 1600RPM. The Max Torque Measurement on a Volvo mini digger is 75.2lb feet with 102 NM. Although there are many specifications in a mini digger the torque, this device is created to give outstanding performance.
Wheel bearing are what allow wheels to spin smoothing on an axle. A broken wheel bearing can lead to fatal car accidents. To replace a wheel bearing on a Volvo s80 remove the wheel hub and have the bearing pressed out. Press the new bearing into the wheel hub to ensure a safe install.
To replace a wheel bearing on a 2007 Volvo S40 you need to remove the caliper bolts first and then extract the car's rotor. Then you must put the new bearing on the knuckle.
2431
I believe it is a 36mm.
80 foot pounds
The name of Volvo, the Swedish car company, is Latin for "I roll." It was originally intended to be the name of an automotive ball bearing.
In order to replace a wheel bearing, the tire must first be removed on a Volvo v50. The wheel cowling can be removed exposing the bearings. After taking the bearings out, clean the housing and repack the bearings.