If crankcase oil is light alloy are 55 Nm, and if it is plastic are: 1st stage: 0.5 Nm , 2nd stage: 10 Nm , 3rd stage: 35 Nm
The Mercedes-Benz oil pan bolt torque setting is 30 pounds. You should torque the oil pan bolts in 15 pound intervals.
The 2001 Hyundai Elantra oil pan bolts torque should be 84-108 in-lbs
For the oil pan bolts on a 2001 Ford Escape, the torque should be 18 ft lbs. This is equal to 24.4 N.m.
The torque specs for the oil pan bolts are 105 inch lbs. Tighten all of the pan bolts snug to make sure everything lines up before tightening all of the bolts to spec.
10NM or 88lb.in. More important is even torque over the actual amount. I would suspect you have another leak. I know on my 83' 300d I did.
9 ft-lbs
215 in. lbs
Tighten the1/4 inch bolts 7-9 ft. lbs of torque, and the 5/16 bolts to 12 ft. lbs. torque.
Oil bolt washers and threads lightly. stage 1: Torque all bolts to 30Nm stage 2: angle torque all bolts +90 degrees stage 3: angle torque all bolts +90 degrees
9 ft lb
Oil Pan bolts torque in sequence 15-22 lb ft. or if you mean the drain plug, that is 8-12 lb ft.
30 newton-meter