10NM or 88lb.in. More important is even torque over the actual amount. I would suspect you have another leak. I know on my 83' 300d I did.
The water pump on a Mercedes ML320 is replaced by draining the coolant, removing the radiator hoses, and unbolting the pump. The gasket can then be replaced and a new pump put in place.
If you needed a gasket and they replaced it then yes you would be charged for the gasket.
For a permanant cure the head gasket must be changed the head will possibly require skimming as well to ensure flatness Dependant what engine is fitted head gasket replacement times are qouted as between 6.1 & 9.0 hours best wishes
You have a blown head gasket or a cracked head. STOP driving this car immediately or you will do serious damage to the engine. It will need the gasket replaced and the head checked.You have a blown head gasket or a cracked head. STOP driving this car immediately or you will do serious damage to the engine. It will need the gasket replaced and the head checked.
Blown Head gasket. Recommend getting it replaced ASAP
White smoke is from water getting into the cylinders. If this only occurs at start up the head gasket probably weeps into the cylinder. The gasket will probably get worse until the gasket gets replaced.
you could have a blown or leaky head gasket. white smoke would be caused by coolant getting in to the combustion chamber and getting burnt creating steam.
Having a head gasket replaced on a 2000 Amigo can be replaced but it can be hard depending on if the mechanic has the right instructions. Also, depending on the condition of the head gasket can depend on how hard it is replace the gasket.
valve cover gasket
At best, they're a temporary stopgap measure until you can get the gasket replaced.
Depends on your mecanical skills--A Haynes manual will help but it is not easy. If you do it be sure to measure the length of your head bolts and if you have oil in the coolant all hoses must be replaced
The head gasket on a 1999 Chevy Malibu is replaced by removing the coolant, intake manifold, and retaining bolts. The cylinder head can then be removed, the gasket replaced, and everything reassembled.