Want this question answered?
The cylinder head torque on a 2000 Honda Civic is set at two different rates. For placing the head correctly the bolts need to be tighten to 22 ft torque. Once correctly set the bolts will need 49 ft torque to be properly tighten.
The 2000 Mazda 1.8 liter engine valve cover torque specification is 45 pounds. The valve cover bolts should be torqued in 15 pound intervals.
Hello: Install cylinder head bolts. Tighten cylinder head bolts according to following procedure: Tighten cylinder head bolts in order shown, Can not show diagram for this. Tightening torque : 36.1 lb-ft (49N
what torque specs on cam shaft bolts 2000 saturn 2.2
What is the Cylinder Torque sequence 2000 Pontiac Montana 3.4V6
The 2000 Kia 2.0 liter engine cylinder head bolt torque specification is 125 pounds. The cylinder head bolts should be torqued in 25 pound intervals.
what torque specs on cam shaft bolts 2000 saturn 2.2
to what torque must the bolts on the head of a 2000 Hyundai accent be tightened?
torque settings for mains,big ends and cylinder head Opel Corsa 1.7diesel 2000
Tighten the bolts to 60 nM (44 ft. lbs.) in sequence. Tighten the bolts to 60 nM (44 ft. lbs.) in sequence.
You need new head bolts old head bolts been stretched. You have torque head bolts in five passes. First pass torque head bolts 18 ft lbs. Second pass add additional 90 degrees.third pass add additional 90 degrees.fourth pass add additional 90 degrees.fifth pass add 15 degrees.
the torque spec for what?