Want this question answered?
What tools do you need to remove the crankshaft pulley on a 1995 Honda Passport?
which direction does a crank shaft pully bolt screw out on a 2002 honda accord lx 2.3l eng. clockwise or counterclockwise?
You don't
crankshaft pulley bolt is left hand thread,so it will come out opposite direction to normal bolts
The crankshaft spins counter-clockwise on a 1997 Honda. To remove the bolt for the main pulley spin the bolt clockwise.
Try using harmonic puller
Your will have to loosen up the alternator, and take off the alternator belt from around the crankshaft pulley. To get the crankshaft pulley bolt off, you will have to use in impact wrench on it. Should be on the driver side of the car. Also it is a regular threaded bolt. The torque on it from the factory is around 115lb/ft. You will need a 17mm Impact socket and a good impact wrench. It will not break loose easily if there is rust on it like most that are 20 years old. Even with penetrating oil it will not be an easy job. Use care when working with the crankshaft pulley as it is old and will crack easily as well.
At a Honda dealer for $10. If one is not within driving distance, then go to Honda.com.
Removing the crankshaft pulley bolt on a Honda is a real job if you don't have the special tool. I used to use an impact gun that produces over 750 ft/lbs of torque and still couldn't get them loose! Not to worry...the tool is not that much and you can find one at DenLorsTools.com. With this tool, the job is much easier. Hope this helps.
Impact wrench. It's the ONLY thing that works.
Two Words------IMPACT WRENCH
how to replace the rear bearings on a 1999 Honda fourtrax ATV