290 nm front wheel bearing 1.7 puma
Front wheel bearings are pressed in using a hydraulic press, no torque setting. However, the wheel hub retaining/axle nut that you need to remove and replace in order to change out the bearing needs to be torqued down to 233 ft-lb.
The front wheel bearing torque setting on a Renault Clio ranges between 112 to 174 ft lbs. One needs to use a 30 mm socket on a 1 inch air gun to loosen the nut.
Front hub/wheel bearing torque is 190-210Nm.
The Honda accord rear will bearing should be torqued at 60 pounds. You can ruin the wheel bearing or the wheel seal if you over torque the wheel bearing nut.
what is the torque on front wheel bearings for 1998 honda accord
It is 175 ft lbs for the front wheel bearing of a grand cherokee
235nm
Rear wheel bearing nut tork setting
front bearing torque 151 ft lb rear bearing torque 63 ft lb plus 36 degrees
What is the torque for the following Nissan navara QD32 1)main bearing cylinder head 3)conrod bearing 4)fly wheel
120 nm.
tourqe on 2001 front wheel bearings