225 ft lbs
177 ft. LBS.
Using new bolts, torque the front hub/bearing assembly to 96 ft-lbs.....
What are the torque specs for a 2004 2WD Chevy Tahoe front wheel bearing assembly 5.3 liter engine
192 ft/lbs or 260 NM
Front wheel bearings are pressed in using a hydraulic press, no torque setting. However, the wheel hub retaining/axle nut that you need to remove and replace in order to change out the bearing needs to be torqued down to 233 ft-lb.
118 ft lbs 1997-2004 Buick LeSabre
Is the wheel bearing on the front or the rear ????.. There is a big difference ...
Remove the tire and wheel from your 2004 Mercedes 240. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing seal and the wheel bearing.
You will need to remove the tire and wheel from your 2004 Chevrolet Astro Van. Remove the end of the axle. Remove the wheel bearing nut. Remove the wheel bearing and the wheel seal. Reverse the process to install the new wheel bearing.
When not knowing how to remove the front wheel bearing on a 2004 Sienna consult with an auto mechanic to ensure the process is being done properly. Also, the Sienna has an owner's manual that will assist in this removal.
They are a sealed bearing and are not greaseable.
i also thought my 2004, tacoma had a bad wheel bearing. It turned out that it was the wheel itself not the bearing. Try rotating the tires and see if the noise moves to the rear. I waited 30000 miles to rotate, hopefully that will help.