if you have the old style nut (keeper pack with multiple nuts inside) torque it to 284 ft.lbs. - If you have the newer style solid nut, torque it to 173 ft.lbs. if you do have the old style nut i recommend that you replace it with a solid nut due to the fact that the older ones have been know to cause some bearing failures.
118 Foot Pounds
2003 SATURN L 300 front axle torque spec
200 foot pounds.
what is the Torque spec for rear axle hub nut on a 2002 ford explorer
180lbs per the spec
103 ft lbs http://www.autowaresgroup.com/resources/documents/spindle_nut_torque_specs.pdf
what the torque spec for the cylinder head on a 2003 saturn L300
Getting ready to do the same thing myself--foound out you will need a 34MM deep socket, torque wrench but I am still trying to find torque spec for axle nut--GOOD LUCK
The torque spec is at 95 ft/lbs. Per cycle center of denton.
118ft lbs
rocker arm torque specs
The 2003 Pontiac Grand Prix wheel bearing nut torque specification is 40 pounds. Do not exceed the 40 pound specification or you will risk causing the wheel seal to fail.