170 ft-pd
The front bearing for a Dodge Stratus is attached to the Hub. To replace it remove all the components on the hub assembly. There are three bolts that hold the assembly in place. Loosen the bolts and pry out the hub. Replace the unit.
$185.00 parts and labor front left side
The front spindle must be removed as the bearing is pressed in. Not a job for a beginner, but if you have some auto expertise, not too difficult...
spec calls for 185 foot pounds of torque, with a new nut.
175 ft lbs
There wasn't a 1991 Dodge Stratus.
front bearing torque 151 ft lb rear bearing torque 63 ft lb plus 36 degrees
No, a Stratus engine sits transverse, while the Intrepid sits front to back.
2wd is 185 ft lbs 4wd is 173 ft lbs
Front hub/wheel bearing torque is 190-210Nm.
Struts
Behind the front motormount