square foot of what, concrete, wood or paper or what
50 lbs
Given that there are 144 square inches per square foot, 100,000 pounds per sqaure foot equals 694.44 pounds per square inch.
The construction cost per square foot in Asheville, North Carolina is about $88 per square foot. This means a 3000 square foot building would cost about $264,000 to build.
'bout 7 swags per square foot
A square foot of quartz has no definite weight because a square foot has no thickness.
50 lbs
mph is a unit of speed; pounds per square foot is a unit of pressure. You don't convert that.mph is a unit of speed; pounds per square foot is a unit of pressure. You don't convert that.mph is a unit of speed; pounds per square foot is a unit of pressure. You don't convert that.mph is a unit of speed; pounds per square foot is a unit of pressure. You don't convert that.
The roof load is a rating that determines how many pounds per square foot the roof will withstand. Most roofs are rated above 300 pounds per square foot or more.
500sq ft per ton but the best most efficient sizing is to do the manual j load calc
No it is not metric unit. It is foot-pound-sec unit. Psi is pound per square inch.
770/500 = 1.54 gallons per square foot
Divide the heat loss or gain obtained by the load calculation by square footage of the building.
The total outlet load may also be determined on a watts-per-square-foot basis.
No No they are not the same. BTU is a unit of measure, square foot is another unit of measure. So BTU per square foot is refining the unit of measure further. Another example of your question would be: miles and miles per gallon, two different but related units of measure.
Unfortunately, this question is unanswerable. Pounds per square foot is the imperial unit for density. Density is the amount of mass for a unit volume. Since you have provided only the mass of the object, and no volume, the Density cannot be determined.
It is a "LIVE LOAD" which is the weight of snow for which a roof is designed for. It is usually 40 lbs. per square foot. Al dead load is the weight of the roof structure itself.
Given that there are 144 square inches per square foot, 100,000 pounds per sqaure foot equals 694.44 pounds per square inch.