To connect a PC to a switch you should use a straight through UTP cable.
To interconnect devices of same Port specifications (Same Fabric). For e.g. PC to PC, Switch to Switch.
"RJ-45 Cross cable" is required for a direct ethernet connetion between two pcsbetween the same type of network devices (PC-to-PC, switch-to-switch, router-to-PC (Note: router and PC are LIKE devices, because both are DTE)) you use Crossover cable.to connect different type of devices (PC-to-switch, PC-to-router ..) you use Straight Through cable.
You haven't invoked the right permissions or enabled remote accesses
You can't play Nintendo Switch games on a PC, you need a Nintendo Switch.That does not include games which started out on PC and were ported to Switch.
Connect a wire from each PC to an unused port on the switch.
Straight Cable is used to connect a device to a different type of devices Eg: PC to a Switch PC to a Hub Switch to a Router E.t.c. Cross Cable is used to connect a device to a similar type of devices Eg: PC to PC Switch to Switch E.t.c.
plug it in
switch off lights when your not using them only boil as much water that you need don't use too much water in the shower switch off the PC when not in use
Either use a crossover cable or connect them using a hub, switch, or router.
crossover cable
You can connect 2 PC`s without the use of a switch with a cross-over cable.