A filter circuit is an electronic circuit made using capacitors and inductors. It is designed to produce a restriction on the frequency-bandwidth of an alternating input signal - such as, for example, a wireless/radio signal - to produce a narrower frequency- bandwidth as its output.
Another common use of an electronic filter circuit is to remove most of the ac ripple which remains in the output of a diode-based ac rectification circuit so that the resulting is of better quality.
The aim is to eliminate or enhance specific frequency
The ANALOG FILTER used in analog circuits.The DIGITAL FILTER USED IN DIGITAL circuits.
Jim use dc supply in oscillator circuits to and ac out put.
There is no true advantage of RC circuits over RL circuits, as they perform different functions. RC circuits contain resistors and capacitors, while RL circuits contain resistors and inductors.
combinational circuit
Bipolar Transistors and Diode's .
A transformer does not use a filter. You may be asking about the use of a filter in a power supply. A power supply uses a filter to change pulsating DC from the rectifier into smooth DC for the circuits that the power supply powers.
RC circuits can be used to filter a signal by blocking certain frequencies and passing others.
The electrolytic capacitor is most often used in power supply circuits to filter the rectified AC.
His logic runs in circuits.
The ANALOG FILTER used in analog circuits.The DIGITAL FILTER USED IN DIGITAL circuits.
band passband rejectlow passhigh passcombetc.RCRLLCRLCetc.
filter,servo control system,summing &difference application
filter circuits
In any rectifiers circuits the purpose is to get a DC voltage by giving AC voltage as input.by connecting capacitors parallally in the circuit it is possible to get pure DC output.capacitor filter only eliminates the ac quantities remainimg in the output waveforms.so that finally we get pure DC for further aplications in electronics circuits.
There are no particular advantages or disadvantages of series or parallel circuits. Some circuits require one while other circuits require the other. Frequency filters often require one or the other depending on whether you need a pass or rejection filter.
im sorry dont know lol
Jim use dc supply in oscillator circuits to and ac out put.