20-60 usd
on the right side of a crvena zastava-cal 7.65mm mod70 pistol you will see a round pin above the trigger push that pin out and the pistol will disassemble by pulling the slide forward. johnny
Try e-gunparts.com
there is a flat holding pin just ahead of the cylinder, it must be pushed out to slide the cylinder off
Try doing a web search on "gun parts coporation".
A pistol by loading ammunition into the chamber. The firing the pin then strikes the cartridge, which causes the pistol to discharge.
pull the trigger guard down
No one in particular has to verify the missing pin, the bowler who is missing the pin can either reset the pins and hope that fixes it or call it in to the front desk whop will fix the problem.
If it is the ground pin that it is missing there will be a safety factor involved as there will be no ground return to the distribution panel should a fault on the circuit occur. If it is any other pin missing the circuit will be open and the circuit will not be energized.
Remove magazine,cock and lock it,then firmly hold the firing pin section,turn it clockwise and full with care,then unlock the slide carefully,done
Market value is $500- $900, just the clips are ebaying for $150-$200, firing pin ebaying for $150-$175 holster ebaying for $150
No, but, e-gunparts.com might.
Best left to a gunsmith