That would be a 200 Ohm resistor, and you didn't mention the tolerance, so I'm guessing you didn't see another band which means the tolerance would be at 20%
Simple 150 ohm
1 Ohm, +/- 5% tolerance
100 ohms
A 0.1 ohm resistor is color coded brown (1) black(0) silver (x 10-2).
Green - Black - Red, but this is not a standard value. You probably want a 5.1K resistor, and that is Green, Brown, Red
Resistors have standard colors for identification of the resistance value. In order, the colors are: black, brown, red, orange, yellow, green, blue, violet, gray, and white. Reading resistors is a very simple procedure if you use the chart and formula below. Hold the resistor with the gold or silver band to the right and read the resistor from the left to the right. http://www.westfloridacomponents.com/reschart.html
Hi You can find the value of the resistor by using colour code printed on the resistor. 1. Hold the resistor such that the colour code starts from left. 2. Each of the colour bands present on the resistor specifies a value. 3. The first colour band represents the first significant figure, the second band represents the second significant figure and the third band indicates the multiplier. The fourth band represents the tolerance. Gold band- 5%, Silver band-10%, No band-20% 4.Find the appropriate values for the colour by using the chart 1. 5. Find the value of the resistor by using the formula 1. Chart1 Example: Here first band represent brown. Second band represent black. Third band represent red . Fourth band represent gold. The value of resistor = 10 x 102 ± 5% = 1kΩ ± 5%
To identify the value of a carbon resistor using colour code use the following table...0 - Black1 - Brown2 - Red3 - Orange4 - Yellow5 - Green6 - Blue7 - Violet8 - Grey9 - White... and look at the bands. The first two bands will be the digits, and the third band will be the multiplier. For instance, Brown - Red - Orange will be 12000 ohms, where the 1 is the first band, the 2 is the second band, and the three 0's is the third band.If the third band is Gold or Silver, then the multiplier is 0.1 or 0.01 respectively. For instance, Brown - Red - Gold would be 1.2 ohms, and Brown - Red- Silver would be 0.12 ohms.If there is no fourth band, the resistor is +/- 20%. If the fourth band is Silver, the resistor is +/- 10% and, for Gold, +/- 5%.Some high end resistors have more bands. The 1% resistor will have a third digit band, and some resistors will have a band indicating temperature coefficient.
A 0.1 ohm resistor is color coded brown (1) black(0) silver (x 10-2).
Brown (1) - black (0) - orange (4 more 0's) - 10,000 ohms.
149 ohms, I believe.
15 k ohms with a 10% tolerance.
Green, Black, Orange, (gold / silver) Green = 5 Black = 0 Orange = x10^3 50x10^3 = 50,000 or 50k Ohm
Green - Black - Red, but this is not a standard value. You probably want a 5.1K resistor, and that is Green, Brown, Red
220 ohms with a 10 percent tolerance. Red is 2 and brown is 1. Brown is in the multiplier band so it is 10 times the value in the first two bands. Silver is in the tolerance band. Gold would have been a %5 tolerance device.
Resistors have standard colors for identification of the resistance value. In order, the colors are: black, brown, red, orange, yellow, green, blue, violet, gray, and white. Reading resistors is a very simple procedure if you use the chart and formula below. Hold the resistor with the gold or silver band to the right and read the resistor from the left to the right. http://www.westfloridacomponents.com/reschart.html
Orange, orange, brown is 330 ohms.
On a color coded resistor, there are normally four color bands. The first three represent the value of the resistor and the fourth represents the tolerance of the resistor, i.e. the acceptable variation as a percentage from the stated value. No fourth band allows +/- 20% Silver allows +/- 10% Gold allows +/- 5% Red allows +/- 2% Brown allows +/- 1%
When a resistor has a 4th color band, its color is either gold or silver, so I will assume the color bands are white-white-white-gold. The resistance is 99 GΩ ± 5%.
brown brown silver gold